Skip to main content
  • Home
  • Global Tech
  • Tariffs Protect Home Markets, but US and European EVs Face Chinese Price Competition Abroad: Robotic Assembly Offers a Way Forward

Tariffs Protect Home Markets, but US and European EVs Face Chinese Price Competition Abroad: Robotic Assembly Offers a Way Forward

Picture

Member for

1 year 3 months
Real name
Siobhán Delaney
Bio
[email protected]

Siobhán Delaney is a Dublin-based writer for The Economy, focusing on culture, education, and international affairs. With a background in media and communication from University College Dublin, she contributes to cross-regional coverage and translation-based commentary. Her work emphasizes clarity and balance, especially in contexts shaped by cultural difference and policy translation.

Modified

China expands low-cost exports by cutting battery and component costs
US and European automakers face a battery procurement cost disadvantage from the outset
They must seek cost savings by automating assembly at domestic factories

A warning has emerged that US and European automakers will lose ground in price competition with Chinese electric vehicles if they rely solely on tariffs. Chinese manufacturers have lowered vehicle prices by sourcing batteries cheaply and producing key components themselves, using that advantage to expand exports. Even if the US and Europe impose tariffs on Chinese EVs in their home markets, the price gap overseas remains unchanged. With little prospect of immediately narrowing the battery cost gap, Western automakers must first reduce labor costs per vehicle by assigning component transport and assembly to robots.

Tariffs Alone Cannot Stop China's EV Offensive

According to US automotive publication WardsAuto on the 18th local time, Adam Ragozzino, principal analyst at market research firm Omdia, warned that Western automakers, including those in the US and Europe, would lose ground in price competition with Chinese EVs if they relied on tariffs. At a panel discussion co-hosted by WardsAuto, he said they needed to cut less-profitable model variants and change assembly processes to reduce production costs per vehicle. Looking ahead to the global automotive market in 2027, Ragozzino identified rising Chinese EV exports as the foremost variable. For established automakers, the key question is whether they can absorb rising costs without increasing vehicle prices as raw material costs and tariff burdens mount. For Detroit automakers in particular, he focused on whether they had the capacity to mass-produce EVs at prices middle-class consumers could afford.

As Chinese EV exports grow, Western automakers first face price competition in overseas markets beyond the protection of their domestic tariffs. According to the International Energy Agency (IEA), China's electric passenger car exports more than doubled to over 2.5 million units last year. China's BYD alone exported more than 1 million battery-electric vehicles and plug-in hybrids. In Brazil last year, the average selling price of Chinese-brand battery-electric vehicles was lower than that of internal combustion vehicles sold locally. Ragozzino said Chinese manufacturers had lowered prices while offering software features consumers wanted, whereas many established automakers still lagged in the sophistication of software controlling vehicle functions.

The first areas Ragozzino recommended overhauling to reduce costs were the finely segmented trim levels and powertrains offered for each model. Even within the same model, different components for each trim and different engine-transmission combinations increase both the variety of parts a factory must manage and the number of assembly procedures. McKinsey's study of 10 Chinese battery-electric models found that each offered 2–4 option packages beyond the base version. Of these, 5 were designed to allow performance upgrades simply by changing the battery or motor, without requiring a higher trim level. Ragozzino urged established automakers to eliminate low-profit trim and powertrain combinations first, then redesign production lines to reflect the reduced variety of components and workload.

Table 1. China's Expanding EV Exports and Challenges for Established Automakers

CategoryChinese EV TrendsChallenges for Established Automakers
Export GrowthElectric passenger car exports exceeded 2.5 million units in 2025, double the previous year
BYD exported more than 1 million battery-electric vehicles and plug-in hybrids
Secure price competitiveness in overseas markets beyond the protection of domestic tariffs
Price and Software CompetitionIn Brazil in 2025, the average selling price of Chinese-brand battery-electric vehicles was lower than that of internal combustion vehicles sold locally
Offer software features consumers prefer
Absorb rising costs without raising vehicle prices
Mass-produce EVs at prices middle-class consumers can afford and improve software quality
Specifications and Production ProcessesAcross 10 battery-electric models, 2–4 option packages per model beyond the base version
Of these, 5 allow performance upgrades by changing the battery or motor without choosing a higher trim
Reduce low-profit trim and powertrain combinations
Redesign production lines to reflect fewer component types and a reduced workload
Sources: WardsAuto, Omdia, International Energy Agency (IEA), McKinsey

China's EV Cost Advantage Starts with Battery Cells

Even with assembly process improvements, however, it is far from easy for US and European factories to match China's production costs. The prices paid for components before vehicle assembly even begins already differ substantially. For a small sport utility vehicle (SUV) with the same battery capacity and motor output, the IEA estimated that direct manufacturing costs in China were roughly one-third lower than in the US and Western Europe. For battery-electric vehicles, the electric powertrain, including the battery, accounted for about 40% of the overall manufacturing cost gap. For example, when producing a vehicle with a 75-kilowatt-hour (kWh) battery, US and European manufacturers spent USD 2,000–3,500 more than Chinese manufacturers on battery cells alone.

Chinese manufacturers' ability to procure batteries cheaply stems largely from years of domestic mass production across the entire chain, from materials to finished products. Last year, China produced about 85% of the world's cathode active materials and more than 90% of its anode active materials for EV batteries. Chinese factories also accounted for more than 80% of global production of battery cells using these materials. In particular, the lithium iron phosphate (LFP) batteries that Chinese manufacturers have focused on carry lower material costs because their cathodes do not use expensive nickel or cobalt. More than a decade of mass-producing cells and improving the efficiency of automated equipment has also had a significant effect. According to IEA analysis, differences in factory manufacturing efficiency accounted for more than 40% of the battery production cost gap between China and Europe.

Three out of Four Components Made In-House

Chinese automakers' approach to reducing component costs is evident both in battery procurement and in their in-house production of drive units and electronic components. A prominent example is BYD's Seal electric sedan. A 2023 teardown analysis by Swiss investment bank UBS found that components made in-house by BYD, including battery cells and power semiconductors, accounted for 75% of the total. Integrating 8 components, including the motor, reduction gear and onboard charger, into a single drive unit from the design stage was also cited as a cost-saving factor. At the time, UBS estimated that producing one Seal in China cost USD 10,500 less than producing a Volkswagen ID.3 EV in Europe.

Falling component costs have also given Chinese automakers room to lower vehicle prices in their domestic market. Last year, higher-priced SUVs accounted for a larger share of battery-electric vehicles sold in China, and battery capacity per vehicle also increased. The IEA estimated that these two factors alone would have pushed the average battery-electric vehicle price up by about 3% from the previous year. Yet falling prices for battery cells and other components, combined with manufacturers' competition for sales, drove the actual average price down by more than 10%. In the SUV market, which accounts for roughly half of China's new vehicle sales, the average price of battery-electric vehicles fell to the same level as internal combustion models for the first time last year.

Per-Vehicle Costs Hold the Key to Catching Up with Chinese EVs

In these circumstances, the only way US and European manufacturers can narrow the price gap with Chinese EVs is to increase the assembly work performed by robots at their domestic factories. When batteries and powertrains are expensive to procure, high assembly labor costs leave little room to lower the selling prices of entry-level EVs. According to IEA estimates, labor costs in China's automotive industry are between one-fifth and one-third of those in major advanced economies. Even when installing the same component takes the same amount of time, US and European factories bear higher costs. That also means greater labor cost savings from reducing manual work by one hour per vehicle through assigning component transport or assembly to robots.

Final assembly, which still involves substantial manual work, is seen as a process with considerable potential for automation. McKinsey found significant scope to expand robot use, from transporting components to workstations to installing them on vehicle bodies and inspecting assembly quality. For example, automated guided vehicles can supply parts in assembly order, reducing the time workers spend leaving their stations to retrieve components. When installing parts that have reached the workstation, collaborative robots can tighten underbody bolts or fit windshields. Boston Consulting Group (BCG) estimated that increasing automation in stamping and final assembly could reduce component processing and assembly costs by 3–4%, even after accounting for additional equipment costs.

Catching Up with China Is Difficult Without Cutting Assembly Costs

Standardizing component specifications and installation methods across vehicle models also increases the utilization of robots deployed in final assembly. The reduction in variants Ragozzino advocated also makes it easier to use the same components across multiple models. Sharing component fixtures and tools reduces the time spent stopping and retooling equipment whenever the model changes. McKinsey also identified camera-based component positioning technology as a way to reduce investment in equipment dedicated to individual variants. If robots adjust their movements to match component locations, models with slightly different installation positions can be assembled at the same workstation. The more assembly volume a single line handles across multiple models, the lower the equipment cost allocated to each vehicle.

Robots can also reduce costs at suppliers during component production, before parts reach vehicle assembly plants. Making a vehicle's wiring harnesses, which carry power and signals throughout the vehicle, requires about 10 hours of manual labor. Among these tasks, gathering wires together and wrapping them with tape is repetitive work well suited to collaborative robots. Researchers who published a paper in the journal Robotics divided taping work between a worker and a collaborative robot, reducing the time needed to process one wire bundle from 40 seconds to 35 seconds. In terms of hourly throughput, that means the same workstation can handle about 14% more volume than before. Assuming an equipment price of EUR 55,000, the researchers estimated that productivity gains would yield an investment payback period of less than 1 year and 6 months.

Picture

Member for

1 year 3 months
Real name
Siobhán Delaney
Bio
[email protected]

Siobhán Delaney is a Dublin-based writer for The Economy, focusing on culture, education, and international affairs. With a background in media and communication from University College Dublin, she contributes to cross-regional coverage and translation-based commentary. Her work emphasizes clarity and balance, especially in contexts shaped by cultural difference and policy translation.

Similar Post